Automatic H Beam Production Line , Shot Blasting Machine 0.5-6m/min 

Description:

Roller conveyor H beam shot blast machine is designed and manufactured to clean the surface of the large section steel. It is most used for t removing the rust, scale and contamination from the steel surface of large scale H-Beam and I-Beam. 

The components crosses the tunnel laid on a roller conveyor, extendible outside with modular lengths. The surface treatment  is done during the running through the blasting room:  at one single  pass it is possible to achieve the required finishing degree, according to the specification of standard ISO 8501-1 and  SIS SS 055900.

Brushing and blowing systems allows the steel shot removal at the end of the shot blasting.

Specifications:

1. Major technical parameter

2. Provide goods and compose parts

a. Shot-blasting main frame: clean part, longitudinal spiral conveyer, Q034 impeller head 8, chromium iron board

b. Roller way: 26m former-and-back roller way, motor deceleration machine

c. Ball recycling system: transverse spiral conveyer, elevator, separator, ball supply machine

d. Ball-clearing system: up nozzle, lateral nozzle, piping

e. Dust removal system: dedusting piping, valve, bag, centrifugal Fans

f. Electric system: electric control box, AC inverter, receive line box, separate line box

g. Spare parts: buttons switch*5, 2 pieces of 10A fuses, steel ball separate cylinder*2, gas valve

3. Performance

HP8016 H beam shot blasting machine is specially designed for the surface cleaning and intensifying of H beam. It can intensifying roughness and increase the adhesion effect. There are 8 shot-blasting device and anti-corrosion device on both sides of the blasting area. They will be installed at the best piece according to the characteristics of H beam. There is a protecting cover lining on the internal wall of the box. Which is replace. The dust-removing system adopts the internationally advanced drum-type device, characterized by high efficient, low running resistance, sm